How To Spool A Spinning Reel: A Complete Step-By-Step Guide

A spinning reel is a type of fishing reel mounted on the stationary fishing rod on the side where one side has a metal arm that catches the handle is turned.

When the handle is turned, the metal arm disengages, leading to casting, so the line spirals liberatingly off the spool and gets carried by the cast lure.

The parts of spinning reels to be known by the user to learn how to spool a spinning reel:

  • The drag
  • The spool
  • The bail
  • The handle
  • The anti-reverse switch

Parts Of A Spinning Reel

parts of a spinning reel


1. The Drag

Drag is a system situated at the top of the spinning reel and helps add or remove the tension on the fishing line. Moreover, there is a knob on top of the spool, which allows the anglers to adjust the frictionless plates. Drag increases or decreases tension and gives the adjustability to help pull up the fish.

2. The Spool

The spool is a cylindrical device often wound around the fishing pole. This can be e-thread wire or tape, and its function is to move in the sealed case and provide the process of either opening or blocking the ports depending on the position of the fishing rod.

3. The bail

Bail has two main functions. At first, the bail is also known as the casting trigger to help properly cast the bait. While putting the appeal, the cast must be open, and while retrieving the bail, it must be closed. It can be turned closed when it is being reeled up.

There are automatic closing systems provided. However, one can use them manually simply by turning that bail to the original position.

4. The Handle

While casting baits, the grip is necessary, so one must always make their reels fit their needs.

5. The Anti-Reverse switch

This feature is located at the bottom of the spinning reel, which is very useful for turning the reel forward or backward while hoping to catch the fighting fish. This helps the anglers to take off the reliance on drag and hang-on-line tension.

How To Spool A Spinning Reel

A properly spooled spinning reel gives a fisherman the best expectations to catch a fish. On the other hand, if one does not know how to spool a spinning reel, their poorly spinning reel may get twisted and tangled, leading the owner to go back empty-handed.

Therefore, this article will show how to spool a spinning reel and other components, such as what lines to use, load a reel, and estimate your actions correctly.

1. Choosing the Fishing Line

The line is a very important element in this process. Their flexibility and rigidness also determine what kind of fish can be caught with them.

  • Monofilament line – This line is a single-strand line that also provides flexibility. This line is very useful if one is using the floating bait since it keeps hooked up in the fish’s mouth secured.
  • Fluorocarbon Line – This type of line is very useful if someone is catching fish in shallow, calm waters. However, they are identical to the monofilament line, with relatively less stretch and bottom contact.
  • Braided Lines – This line is very useful if someone is catching fish at the bottom. They are single-stranded with a little stretch so that cables can cast it to a longer distance. The bait in this type of line gets slowly submerged in water, which makes these lines a great top-water temptation.

2. Loading the Reel

This is another crucial step in how to spool a spinning reel.

  • First determination of whether the reels turn clockwise or anticlockwise. Judgment, however, is very easy. One has to turn the wheel 2 or 3 times. This is how the line will get spooled to the rod, and the other way is to peel when the line is cast.
  • Spinning reels are a type of reel that hangs from the rod instead of resting. Therefore, one must properly hold the casting by wrapping their fingers on the casters while reeling with the other hand.
  • Opening and closing the bail. Therefore, one must flip the bail up to open it and then again to complete it. It’s a small wire handle.
  • After this, one must string their lines through the string guides on the road to secure the line’s place.

3. Spooling the Reel

The first one must ensure that the line is properly entering the spool. Therefore, one has to close the bail and lay the spool on the floor while the label is facing up.

While doing this, the line must go into the reel the same way it comes off, helping the fishers avoid tangling problems. However, if the cable is tangled, face up and flip up the rod so it may come untangled.

  • Now they have to crank the reel, slowly lining it up. To do this, one must pinch the line slowly, about 30cm long. Do these about 20 times, and also in between let the line relax. Allow the line to twist, helping to realign the spool and line. One must always remember to lose up. Otherwise, it might get tangled later.
  • Now, one must continue cramming the ring to load the line. And make sure that the line is not twisting; otherwise, it will become tangled, and one will have to start the process over again. If someone has already flipped their spool on the first inspection, straight out the twist and slowly continue the process.
  • No one has to feel the school until it is one by eight away from the rim, which gives the fisherman plenty of lines to use even if they have to cut a large piece of the line while changing lures or baits without overloading their reel. The owner may leave a small amount of excess line to secure its end with interest and cut the line close to the supply spool, preventing the spool from coming tangled again.
  • Finally, one has to tighten the spool. One can use a lure or clips at the end of the line, which will help prevent the cable from slipping through the slipping guides.

When Fishing On The Spinning Reel, Where And How Does One Has To Tie An Arbor knot?

  1. First, tie an overhand knot on the spool in a clockwise direction
  2. Tie another knot and pull them close to each other tightly
  3. Slide the completed knot through the spinning reel and cut off the excess line.

Benefits Of Using A Spinning Reel

  • Easier to use
  • Low cost
  • Long-lasting
  • Easier to maintain
  • Helps in casting a good range
  • Easy handle
  • Less probability of getting tangled
  • It can be used in all types of fish caught
  • Average specifications help a lot for beginners
  • Maintaining is easy

Drawbacks Of Using A Spinning Reel

  • Cannot handle strong fighting fish
  • Cannot handle much weight
  • Unable to cast heavier lines
  • Do not have a large gear ratio
  • Cannot give prediction inaccuracy
  • Do not have a strong gear system
  • Not much controllable
  • Getting twists in the lines is a heavy risk
  • The drag system cannot handle the constant pressure.


Therefore, these are some steps to follow on how to spool a spinning reel. It is a good way of introducing beginners; with these tips, one can understand the parts more widely.

However, there is always more than understanding. One has to make experiences to understand what all of these truly mean in reality!

Additional Resources:

Young has worked on charter fishing boats in the Florida Keys, Virgin Islands, and Alaska. Growing up in Pennsylvania Young has also done extensive freshwater fishing including bass fishing tournaments. Young strives to provide detailed information about the best fishing gear and tactics to help both novice and experienced anglers have a more productive and enjoyable time on the water.

Leave a Comment